Skip to product information
RC Maker Floating Electronics Weight Plate Set – Xray T4 ’20 - GRIPWORKS RC

Stock: 1

RC Maker Floating Electronics Weight Plate Set – Xray T4 ’20

$71.99 CAD 
Availability: 1 in stock

Kit Includes: 

  • 1x 1mm Weight Plate (12g)
  • 2x 3mm Brass Screw on Weights
  • 1x 0.5mm Floating Plate Shim
  • 1x M3x5 Countersunk Stainless Screw
  • 1x M2.5×5 Countersunk Steel Screw

Introducing the new RC Maker Floating Electronics Weight Plate Set for the XRAY T4’20!

Put your weight where it’s needed most, down low, to get your car up to minimum weight and optimum balance! The set includes a carbon shim which floats the electronics plate 0.5mm off the chassis from near the centre of the car, meaning the plate itself has minimal to no impact on the flex of the chassis! On top of the plate, we have 10g of brass to secure it in place. The plate attaches to the often unused antenna mount hole. If you still want to use this antenna mount, you can use an extra long screw through the lower weight, and thread the antenna mount on-top.

The plate itself is 1mm thick and weighs in at 12g. The set coming in at 22g is a brilliant way to meet the limit, balance your car and have no impact on the flex characteristics of the chassis at the same time!

Another added bonus, is you can change chassis or clean your car, and simply remove your RX, Transponder and Fan simply by undoing one screw! No more annoying double sided tape. Simply tape your electronics to the plate, set and forget!

If you are after more weight for your car, we have a 1.5mm option plate available weighing in at 20g which can either replace the 1mm plate to bring the overall weight up to 30g, or added to the 1mm plate to make a total of 2.5mm, bringing it all the way up to 42g!

The set comes packaged in a high quality black magnetic lid box with RC MAKER logo on a clear front window, ensuring the plate is kept in perfect condition in transit.


  • Standard Kit: 22g
  • Standard Kit with 1mm Plate replaced with Option 1.5mm Plate: 30g
  • Standard Kit with 1.5mm Plate added on top of the standard 1mm Plate: 42g